North West
Manchester · Liverpool · Preston · Bolton
Fever screening systems for commercial and industrial sites across the North West.
Fever Screening Systems for UK Workplaces and Public Buildings
Platinum Asset Protection supplies, installs and supports fever screening systems for entry points across the UK. The equipment measures skin surface temperature without contact and flags anything above the threshold you set, so your own procedure can take over. Installed and maintained by our own engineers from our Leeds headquarters.
What Are Fever Screening Thermal Solutions?
A fever screening system uses an infrared sensor to read skin surface temperature at the face, from a short distance, without anyone touching anything. If a reading comes back above the threshold you have set, the system flags it. What happens next is decided by your procedure, not by the equipment. Systems are usually sited at a main entrance, a staff entry point or a reception desk.
-
1. Nobody has to touch anything. People walk past the sensor and keep moving, so there is no queue at the door and no handheld thermometers to manage.
2. It copes with a shift change, when most of your workforce arrives within the same ten minutes.
3. Units can be fixed in place or moved between entrances, and you can buy one outright or hire it for a set period.
What Are Fever Screening Thermal Solutions?
Fever screening thermal solutions use advanced infrared technology to measure skin surface temperature without physical contact, helping identify individuals with elevated temperatures in real time.
Our fever screening systems are deployed at entrances, checkpoints, and public access areas to reduce manual screening and support safer workplace operations across all environments.
How Thermal Screening Systems Work
Our fever screening systems use advanced heat detection technology to identify elevated body temperatures quickly and without physical contact.
The Process:
- 1. Infrared sensors detect body heat at entry points in facilities
- 2. Fever detection cameras measure skin surface temperature instantly in real time
- 3. Elevated readings are flagged immediately for thermal screening in environments
- 4. Staff receive instant alerts when temperature thresholds are exceeded
- 5. Data is recorded for reporting and compliance across sites
What Happens When the System Flags Someone
This is the part most suppliers skip, and it is the part that decides whether screening actually works on your site.
The equipment flags a reading. It does not decide anything. Before the system goes live you need to agree three things: who is notified, where the person waits, and who makes the call. Most sites settle on a short rest followed by a second reading, with a named duty manager deciding from there.
We configure the alert routing during installation so the notification reaches the right person, whether that is a screen at reception, a phone, or both. The procedure itself is yours to write, and we will tell you if the layout of your entrance makes it impractical.
Timelapse solutions
Types of Thermal Screening Solutions
Permanently installed at a reception desk, turnstile or main entrance. Suits sites that screen every day as part of a standing procedure
Fixed Thermal Camera Systems
Permanent thermal detection systems for entrances, reception areas, and high-security access points requiring continuous monitoring.
Portable Screening Systems
Tripod mounted, set up in about an hour and moved between entrances. Suits temporary requirements, audit periods and trial deployments
Mass Fever Screening Systems
Multi-lane configurations for shift changes and large entrances, so screening does not create a queue at the door
Integrated Screening Systems
Linked to a door release or turnstile, so a reading above threshold holds the barrier rather than relying on someone watching a screen
Key Features of Our Systems
Our fever screening systems and temperature monitoring equipment are built for reliable, contactless screening across any environment.
What's Included:
- 1. Accurate infrared body temperature sensors for precise fever screening environments
- 2. Contactless operation with no physical interaction required for safer workplaces
- 3. Real-time alerts when elevated temperatures are detected in facilities
- 4. Simple setup suitable for both indoor and outdoor thermal screening use in Leeds
- 5. Scalable fever monitoring solutions in for sites of any size
Best Practice
Getting Reliable Readings
Skin temperature is affected by the environment, so where you put the screening point matters as much as the equipment.
Site it indoors, out of direct sunlight, and away from draughts, heaters and external doors. Someone who has just walked in from the cold or been sitting in a warm vehicle will read differently to someone who has been inside for ten minutes, so a short settling area before the screening point makes a noticeable difference.
We assess this during the site survey and will tell you before installation if an entrance is unsuitable, rather than after.
What Gets Recorded
For a lot of sites, the record is the reason for screening in the first place. Audits ask what your procedure is and whether you can show it was followed.
Systems can log readings, time stamps and images, or record nothing at all. What you keep is a decision to make before the system goes live rather than after, because temperature readings linked to an identifiable person are personal data and carry the usual obligations around purpose, retention and access.
We will configure the system to whatever you specify, and we will not switch on logging you have not asked for.
Where We Deploy
Where Thermal Screening Is Used
Our fever screening solutions and thermal detection services are deployed across a wide range of environments requiring accurate body temperature monitoring.
Offices & Workplaces
Temperature screening systems at entry points to protect staff and visitors on a daily basis.
Construction Sites
Fast, contactless fever screening for operatives and contractors entering active sites.
Healthcare Environments
Visitor and staff screening during outbreak periods, and standing procedures in units where residents are vulnerable. Portable units can be deployed for a season and removed.
Retail & Public Spaces
High-footfall fever screening without disrupting customer flow or operations.
Transport Hubs
Mass screening solutions for airports, stations, and busy transit terminals.
Installation & Setup Process
Our fever screening solutions in are structured for minimal disruption and rapid deployment across any site type.
How It Works:
- 1. Site Assessment to identify screening points and requirements
- 2. System Recommendation based on site size and footfall
- 3. Installation & Setup of all temperature monitoring equipment
- 4. Calibration & Testing to ensure accurate readings
- 5. Ongoing Support included as part of every fever screening solution
OPTIONS
Hire or Purchase
Purchase
Full ownership with no recurring fees
Suits a standing, long term procedure
Supported by a maintenance agreement
Can be integrated with permanent access control
OR
Hire
No capital outlay
Suits a defined period such as an outbreak response or an audit window
We install it, maintain it and remove it at the end
Flexible contract lengths
Why Choose Our Thermal Screening Solutions
We install and support the system rather than just supplying it. The site survey, siting advice, installation, calibration, training for your staff and scheduled recalibration are all handled by our own team.
What Sets Us Apart:
- Systems calibrated on installation and recalibrated on a schedule
- Fever screening installation usually completed in a single visit
- UK-based support from our own team, included as standard
- Access control installed by the same team, if you want screening linked to door release
Coverage
Fever Screening Systems Across the UK
We install and support fever screening systems across the whole of the UK mainland from our headquarters in Morley, Leeds. Site surveys, installation, calibration and ongoing support are handled by our own team, with systems supplied for permanent installations or short-term hire depending on your requirements.
Head Office
Yorkshire
Leeds · Sheffield · Bradford · York · Hull
Our base. Fever screening system installation and support across Yorkshire from Morley, Leeds.
-
-
London & South East
London · Reading · Brighton · Southampton
Multi-site fever screening installation across London and the South East.
-
West Midlands
Birmingham · Coventry · Wolverhampton
Thermal entry screening for developments across the West Midlands.
-
East Midlands
Nottingham · Leicester · Derby
Fever screening installation on existing entrances throughout the East Midlands.
-
North East
Newcastle · Sunderland · Middlesbrough
Thermal screening systems across Tyne and Wear, County Durham and Teesside.
-
Scotland
Glasgow · Edinburgh · Aberdeen
Coverage across the Central Belt and the Scottish North East.
-
Wales
Cardiff · Swansea · Newport
Thermal entry screening for healthcare, industrial and infrastructure sites across South Wales.
-
South West
Bristol · Plymouth · Exeter
Fever screening installation and support across the South West.
-
East of England
Cambridge · Norwich · Ipswich
Thermal screening systems for commercial sites across the Eastern counties.
Not listed? We cover the whole of the UK mainland. Call us or book a site survey and we'll advise whether fever screening is suitable for your entrance before you commit.
Frequently Asked Questions
What are fever screening solutions used for?
Fever screening solutions are used to quickly detect elevated body temperatures at entry points. They help businesses improve safety, reduce health risks, and ensure smooth visitor management.
How does a fever screening system work?
A fever screening system uses thermal imaging cameras to measure skin surface temperature without physical contact. The system instantly flags abnormal readings for further checks.
Where can fever screening systems be installed?
Fever screening systems can be installed in offices, hospitals, construction sites, warehouses, schools, and public buildings where high-traffic monitoring is required.
What does a fever screening system actually measure?
It measures skin surface temperature at the face, without contact. It does not measure core body temperature and it is not a diagnostic tool. It flags readings above a threshold you set, so your own procedure can take over.
Do you provide fever monitoring camera installation?
Yes, we provide complete fever monitoring camera installation, including setup, calibration, and ongoing support for reliable temperature screening.
Can we hire rather than buy?
Yes. Hire suits a defined period, such as an outbreak response or an audit window. We install the equipment, maintain it while it is with you, and remove it at the end, so there is no capital outlay.
What gets recorded?
That depends on the configuration and on your data protection position. Systems can log readings, time stamps and images. Because temperature data relating to identifiable individuals is personal data, decide what you need to keep and for how long before the system goes live, and record that decision. We will configure to whatever you specify.
Expert Security Updates
- Security Instructions
- Jul 30, 2026
CCTV Tower Hire in York: Protecting Construction & Development Sites
Home About Services Access Control Solutions Drone Surveillance Fever
- Security Instructions
- Jul 29, 2026
Solar CCTV Tower Hire: How Hybrid Solar & Generator Power Works
Home About Services Access Control Solutions Drone Surveillance Fever
- Security Instructions
- Jul 24, 2026
CCTV Tower Hire vs Manned Guarding: Which Is Right for Your Construction Site?
Home About Services Access Control Solutions Drone Surveillance Fever