Platinum Health and Safety Package, Powered by Bi3 and Eluviant

Most safety breaches are seen by nobody. Someone works without a hard hat for ten minutes, a forklift passes closer to a pedestrian than it should, and unless a supervisor happens to be looking, neither event exists. The Platinum Health and Safety Package uses AI video analytics on your site cameras to catch those moments as they happen.

AI-Powered Health & Safety Monitoring for Safer UK Workplaces

Powered by Bi3 and Eluviant (formerly IntelexVision), the package adds AI PPE detection, slip and fall detection, hazardous area monitoring and near miss detection to a CCTV system. It runs on the cameras you already have where they are suitable, or on cameras we supply where they are not.

Alerts go to the people you nominate, and every event is logged whether anyone acts on it or not.

An Add-On, Not a New System

Health & Safety Package

An Add-On, Not a New System

The Health and Safety Package is a layer that sits on top of a CCTV system rather than a system in its own right. Nothing you already have stops doing what it does now.

It can be added to a system we install, to a managed CCTV hire agreement, or to CCTV towers on a construction site. On sites with existing cameras in suitable positions, the analytics can often run on those instead, with no new hardware at all.

Where coverage is missing or the camera angles are wrong for detection, we supply and install cameras for those positions. Which applies to your site is something we confirm at the survey rather than after you have committed.

Works With Existing CCTV

Add intelligent analytics without replacing a suitable camera system.

✓

Survey First

We confirm whether existing cameras are suitable before recommending additional hardware.

◉

Scalable Deployment

Install only where coverage is missing, keeping upgrades practical and cost-effective.

Smarter Health and Safety Through Video Analytics

The Platinum Health and Safety Package uses AI-powered video analytics to continuously monitor your site, detecting unsafe behaviour, PPE non-compliance, falls, hazardous area breaches, and near-miss incidents in real time. By turning CCTV footage into actionable intelligence, businesses can improve safety performance, reduce risk, and strengthen compliance across their operations.

What the System Detects

Four detection types, configured to the rules that apply on your site. A hard hat requirement in one area and not another, a pedestrian exclusion zone that only applies during deliveries, whatever the actual working arrangement is.

PPE Detection

Automatically detects missing or incorrectly worn PPE, including hard hats, high-visibility clothing, gloves, safety glasses, and site-specific protective equipment, helping maintain workplace safety compliance.PPE compliance monitoring runs continuously rather than depending on a supervisor being in the right place

Slip and Fall Detection

Slip and fall detection alerts nominated staff the moment someone goes down, so response starts immediately rather than when somebody next walks past. On a quiet part of a site that difference can be considerable.

Hazardous Area Monitoring

Creates virtual safety zones and alerts teams when workers enter restricted or high-risk areas, including loading bays, construction zones, machinery areas, and elevated workspaces.

Near Miss Detection

A near miss is a close interaction between a person and a vehicle, a machine or a hazard where nobody was hurt. Because nobody was hurt, most are never written up, which means the pattern behind them stays invisible until something does go wrong. Near miss detection captures those events automatically and feeds them into your near miss reporting, so the record reflects what actually happened on site rather than what somebody remembered to log.

Real-Time Alerts and Incident Response

An alert goes to the people you nominate, with the clip attached so the situation can be assessed rather than guessed at. Where the site suits it, an audio warning can be triggered at the same time, which addresses the behaviour at the moment it is happening rather than in a conversation afterwards.

The Record, Not Just the Alert

An alert is useful once. A record is useful for years. Every event is logged whether anyone responds to it or not, which builds a near miss log and an incident history covering the whole period the system has been running. Site managers, health and safety officers, and operational teams gain complete visibility of safety performance through:

1. Incident logs
2. Event timelines
3. Compliance reporting
4. Trend analysis
5. Safety performance metrics
6. Audit-ready documentation

These insights help businesses make informed decisions and continuously improve workplace safety standards.

How the Platinum Health and Safety Package Works

Site Assessment

Our specialists assess your site, review existing CCTV infrastructure, identify operational risks, and determine the most effective monitoring strategy. The survey confirms whether your existing cameras can run the analytics or whether any positions need new hardware.

System Configuration

The Bi3-powered analytics platform is configured to match your site's operational requirements. Detection rules, virtual boundaries, and safety parameters are customised to your environment.

Live Monitoring

The platform continuously monitors activity across your site, identifying incidents, safety breaches, and high-risk behaviours in real time.

Reporting and Improvement

Detailed reports, trend analysis, and dashboard insights help your organisation improve compliance, reduce incidents, and strengthen workplace safety culture over time.

Benefits of AI Health & Safety Monitoring

Strengthen Safety Culture

Provide teams with greater visibility of safety performance and encourage safer working practices.

Improve Compliance

Support health and safety policies with automated monitoring and audit-ready reporting.

Reduce Workplace Incidents

See the near misses that would otherwise go unrecorded, while there is still time to change something

Scale Across Multiple Sites

One rule set applied consistently across every site, using existing cameras where they are suitable.

Gain Actionable Insights

Use data-driven intelligence to identify recurring risks and implement targeted improvements.

Minimise Liability Exposure

A dated record of what happened, what was detected and when, covering the whole period the system has been running.

Why Choose Platinum Asset Protection?

We are a site security company, not a software vendor. That matters here because the cameras, the analytics and the monitoring come from the same place, so there is nobody to pass the problem to when something needs adjusting. If the package is running on a system we installed, one team handles all of it.

Frequently Asked Questions

1. Does it work with our existing CCTV?

Usually yes. Where your cameras have suitable positions and image quality, the analytics run on the system you already have and no new hardware is needed. Where coverage is missing or the angles are wrong for detection, we supply and install cameras for those positions. We assess this at the site survey and tell you which applies before you commit.

2. What is AI PPE detection?

AI PPE detection uses video analytics to identify whether someone on site is wearing the protective equipment required in that area. It flags a missing hard hat, absent high visibility clothing or eye protection, and alerts nominated staff so it can be addressed at the time rather than found later on footage.

3. Is the Health and Safety Package a separate system?

No. It is an optional add-on to a CCTV or monitoring system rather than a standalone platform. It can be added to a system we install, to a managed CCTV hire agreement, or to CCTV towers on a construction site. Anything already installed keeps working exactly as it does now.

4. What happens when something is detected?

An alert goes to the people you nominate, with the clip attached so the situation can be assessed rather than guessed at. Where the site suits it, an audio warning can be triggered at the same time to prompt safer behaviour immediately. Every event is logged to the dashboard whether anyone acts on it or not.

5. What is near miss detection and why does it matter?

A near miss is a close interaction between a person and a vehicle, machine or hazard where nobody was hurt. Because nobody was hurt, most go unreported, which means the pattern behind them is invisible until something does go wrong. Near miss detection captures those events automatically, so the pattern is visible while it can still be acted on.

6. How is the data handled?

Footage of identifiable people is personal data and carries the usual obligations around purpose, retention and access. Decide what you need to keep and for how long before the system goes live, record that decision, and make sure workers know monitoring is in place. We configure the system to whatever you specify.

7. How long does deployment take?

Where the analytics run on existing cameras, deployment is largely configuration and is usually complete within days of the survey. Where cameras need supplying and installing, it depends on the site, but the detection rules themselves are set up quickly once the coverage is in place.

8. Which areas do you cover?

The whole of the UK mainland, from our headquarters in Morley, Leeds. Configuration and rule changes are handled remotely once the system is live, so distance does not affect ongoing support.